This year 10% of the machine-builders intend to implement IO-Link at the machines.
Future standards for precision mechanics discussed in Jena
Anchors, chains and more
The embedded module TQMPxxxx from TQ-Components is the next generation of the well established PowerQUICC III module familiy TQM85xx. Freescale’s QorIQ processor family P1 and P2 open up new performance capabilities in the world of communication. With one or two e500 cores and a clock rate of 800 MHz and 1.2 GHz, the TQ modules with QorIQ processors offer highest performance and highest computational efficiency. Thanks to the 45nm technology for processors, this module has a lower current draw t
The subsequent application treats silicone gaskets in tempering ovens through vulcanization. In this process, silicone vapors are produced which must be separated. Filtering the harmful substance while simultaneously recovering the heat contained in the air flow proved to be another challenge to the LTA team. The oven temperature amounts to 210° C, the treatment of one charge takes around 4 hours.
The problem at hand was the compound machining of fiber-glass reinforced plastic (FGRP) in dry machining (chip formation). Alternately, aluminium is machined on the same Haas machine VF-6/40 TR using minimum quantity lubrication (MQL) which produces sticky chips. The collection of the chips proved to be quite difficult.
Description of project & system: On the 1st expansion level, an LTA air filter type AC 8002 with a suction output of approx. 10,000 m³ sucks the release agent vapors of 3 presses The aerosols are separated from the contaminated air and stick to the collector surface or condense partially and are drained towards the bottom. Once per day, the offline cleaning cycle is started. For this purpose, the system is switched off and flushed with cleaning oil through nozzle fittings integrated in
In an inductive lacquer drying oven, packing belts from steel wetted with water-soluble lacquer are dried. The air contamination thus generated is sucked off.
In steel machining processes, vapor, gas, smoke and further combustion particles generated at the induction coils of a hardening machine should reliably be extracted.
In a processing plant, plastic vapors are extracted from the extruder by suction.
