The AC 6000-CIP is an automatically cleanable air filter of compact design. Due to its special design, the air filter AC 6000-CIP is perfectly suited for direct machine integration.
The Alstom Power Service company in Berlin is active in service, maintenance & repair of turbines for power generation. At a Dörries Scharmann machining center, a lot of emulsion mist and smoke escaping through the not 100% capsuled machine cover is produced during the turning/milling processes due to the large size of the parts. It was LTA-s task to prevent just that. An LTA air filter type AC 3061 was installed which extracts the generated aerosols and the smoke with an effective suct
The subsequent application treats silicone gaskets in tempering ovens through vulcanization. In this process, silicone vapors are produced which must be separated. Filtering the harmful substance while simultaneously recovering the heat contained in the air flow proved to be another challenge to the LTA team. The oven temperature amounts to 210° C, the treatment of one charge takes around 4 hours.
The problem at hand was the compound machining of fiber-glass reinforced plastic (FGRP) in dry machining (chip formation). Alternately, aluminium is machined on the same Haas machine VF-6/40 TR using minimum quantity lubrication (MQL) which produces sticky chips. The collection of the chips proved to be quite difficult.
Description of project & system: On the 1st expansion level, an LTA air filter type AC 8002 with a suction output of approx. 10,000 m³ sucks the release agent vapors of 3 presses The aerosols are separated from the contaminated air and stick to the collector surface or condense partially and are drained towards the bottom. Once per day, the offline cleaning cycle is started. For this purpose, the system is switched off and flushed with cleaning oil through nozzle fittings integrated in
In an inductive lacquer drying oven, packing belts from steel wetted with water-soluble lacquer are dried. The air contamination thus generated is sucked off.
In steel machining processes, vapor, gas, smoke and further combustion particles generated at the induction coils of a hardening machine should reliably be extracted.
In a processing plant, plastic vapors are extracted from the extruder by suction.
In the metal-working industry, large quantities of cooling lubricant are used especially in cutting processes. These cooling lubricants predominantly are non water-soluble oils having the characteristic to form explosive mixtures with air. Heating them up above their flashing point produces explosive vapor/air mixtures.
The large modules starting from the type AC 800X size versions may now optionally be equipped with an innovative cleaning system.
