These tools are predominantly used to assess manufacturing quality. The MIL Measurement tool uses the projection of image intensity to very quickly locate and measure straight edges or stripes as well as circles within a carefully defined rectangular region. The tool can make several 1D measurements on edges, stripes and circles, as well as between edges, stripes or circles. The Bead Inspection tool is for inspecting material that is applied as a continuous sinuous bead, such as adhesives and sealants, or its retaining channel. The tool identifies discrepancies in length, placement and width, as well as discontinuities. The Bead Inspection tool works by accepting a user-defined coarse path (as a list of points) on a reference bead and then automatically and optimally placing search boxes to form a template. The size and spacing of these search boxes can be modified to change the sampling resolution. The allowable bead width, offset, gap and overall acceptance measure can be adjusted to meet specific inspection criteria. The MIL Metrology tool is intended for 2D geometric dimensioning and tolerancing applications. The tool quickly extracts edges within defined regions to best fit geometric features. It also supports the construction of geometric features derived from measured ones or defined mathematically. Geometric features include arcs, circles, points, and segments. The tool validates tolerances based on the dimensions, positions, and shapes of geometric features. The tool?s effectiveness is maintained when subject to uneven changes in scene illumination, which relaxes lighting requirements. The expected measured and constructed geometric features, along with the tolerances, are kept together in a template, which is easily repositioned using the results of other locating tools. This along with the use of the MIL Calibration tool enables templates to be independent of camera position. MIL 9 Release 2 Processing Pack 2 is the latest processing pack for the Matrox Imaging Library, a software toolkit for image analysis, machine vision, medical imaging and video analytics. Link to Matrox Imaging Library, new Datasheet: http://www.rauscher.de/Produkte/Software/Software-Bibliotheken/Matrox-Imaging-Library.html VISION 2010 Halle 4 – Stand 4c14 For more information please contact: RAUSCHER Johann-G.Gutenberg-Str. 20 D-82140 Olching Phone +49 81 42 / 4 48 41-0 Fax +49 81 42 / 4 48 41-90 E-Mail: info@rauscher.de www.rauscher.de
